SDS Reviews

Isaac David 2026.05.03

     

The freezer began building frost around the back wall and the temperature slowly increased. The technician removed the interior panel and discovered the defrost sensor was no longer triggering the defrost cycle. After installing the new sensor he cleared the ice buildup and restarted the system. Within an hour the airflow returned and the temperature stabilized again. The freezer has stayed frost free ever since.

Useful Report

Bent Andersen 2026.05.02

     

Our oven in Del Mar suddenly stopped heating even though the control panel still worked. The technician inspected the heating system and discovered the bake element had burned out. After installing a new element he ran the oven through a full preheat test. The temperature stabilized quickly and the oven now cooks evenly again.

Useful Report

Alan Sequeira 2026.05.01

     

Had a solid experience in Chula Vista with my dishwasher repair. It kept stopping halfway and leaving soap residue. The tech found a clogged spray arm and a weak circulation pump. Cleaned everything and replaced the pump. Now dishes come out clean again. No hassle, just showed up and fixed it.

Useful Report

Lucrecia 2026.04.30

     

Dryer started making a low humming noise and barely turned the drum. I thought it was overloaded, but even empty it struggled. The technician opened it up and found the motor was on its way out. He replaced it, checked the belt, and made sure the drum was aligned properly. Once it was back together, it ran smooth and quiet. Honestly felt like a brand new machine. He also tested airflow and made sure nothing else was stressing the system. That kind of attention made a difference.

Useful Report

Alan Georgiou 2026.04.29

     

Max showed up for a washer that wouldn’t drain and just sat full of water. He found a blockage deep in the pump and a worn impeller. Cleared it out, replaced the part, and tested a full cycle. Water drained fast and no more weird noises. Max kept it simple, explained what went wrong, and got it done without dragging it out.

Useful Report

Martín 2026.04.28

     

Opened the fridge in the morning and everything felt off. Milk wasn’t cold, but the back wall was covered in frost. The tech checked it out and said the temperature sensor wasn’t reading correctly, so the system kept overcooling in one spot. He replaced the sensor and cleared a clogged drain line while he was in there. After putting everything back together, the airflow improved right away. By the evening, temps were stable across all shelves. I liked how he didn’t rush and actually waited to see it respond before leaving.

Useful Report

Marcos Flores 2026.04.27

     

Ice maker just froze up and stopped producing completely. No noise, no movement. The technician checked it out and said the internal module had failed. He replaced it, reset the cycle, and waited to see the first batch drop. He didn’t rush out and made sure everything was working before leaving. Now it fills evenly and doesn’t jam anymore. He also explained how often to replace the filter to avoid buildup. Small appliance, but a big difference in daily use.

Useful Report

LUCAS HENRIQUE 2026.04.26

     

Ice maker stopped producing and just made a faint clicking sound every few minutes. The technician checked the water line and found it had frozen near the fill tube. He thawed it out, adjusted the water pressure, and made sure the inlet valve was working correctly. After that, it cycled normally and started dropping ice again. He stuck around to watch the first batch, which I appreciated. Now it fills evenly and doesn’t freeze up anymore. Small issue, but handled the right way.

Useful Report

Ellivelton Oliveira 2026.04.25

     

Sonny helped with a cooktop where one burner wouldn’t respond at all. He checked the controls and found the switch had failed internally. Replaced it and tested each burner one by one. Everything worked smoothly after that. Sonny was easygoing, didn’t rush, and made sure everything was safe before wrapping up. Solid experience.

Useful Report

Emerson Goncalves 2026.04.22

     

Washer wouldn’t start and kept flashing a lock error. I thought it was something electronic, but the tech found the door latch had worn out. He replaced the lock mechanism and tested multiple cycles. It clicked shut properly every time after that. Simple fix, but saved me from replacing the whole unit.

Useful Report

Janna lorraine Dacuma 2026.04.20

     

AC stopped blowing cold air right when it started getting warm outside. The fan was running but the air felt like room temp. The technician checked the outdoor unit and found a bad capacitor and a lot of dirt buildup around the coils. He replaced the capacitor, cleaned everything out, and tested the system. Within minutes the air coming through the vents was cold again. He also showed me how to keep the area around the unit clear to avoid overheating. Honestly, I thought I’d need a full replacement, but this fixed everything. Huge relief.

Useful Report

Luis Casares 2026.04.19

     

In Encinitas, my oven stopped reaching the right temperature and everything came out undercooked. The technician tested it and found the bake element had partially failed. He replaced it and verified the temp with a digital probe. Now it heats up quickly and cooks evenly again. Really smooth service overall.

Useful Report

Bryan Bradford 2026.04.18

     

Dryer would shut off randomly and sometimes leave clothes half wet. I thought it was just overheating, but didn’t know why. The tech found the thermostat wasn’t regulating correctly and the airflow was restricted from lint buildup. He replaced the thermostat and cleaned out the internal duct. After that, it ran full cycles without stopping. He also showed me how to check the vent outside the house, which I had never done before. That alone probably saved future issues.

Useful Report

Arthur Severino 2026.04.16

     

Washer started making this deep grinding noise during spin, almost like metal rubbing somewhere inside. It still worked, but every cycle sounded worse than the last. The technician took it apart and showed me the bearing was completely worn out. He replaced it, reassembled everything, and ran a full cycle. The difference was huge. No noise, no shaking, just smooth spinning like it used to. He also explained how overloading speeds up that kind of wear. Didn’t expect such a clean fix, honestly thought I’d need a new machine.

Useful Report

Nilton Martins Tiengo 2026.04.12

     

Our refrigerator started freezing everything on the top shelf while the lower drawers stayed barely cool. The technician checked the airflow system and discovered the air damper that controls circulation between compartments had failed. After installing a new damper he ran the cooling cycle and monitored the temperature difference between shelves. Within a short time the temperature evened out across the entire fridge. It was interesting to see how such a small part could affect the whole cooling system. Everything has stayed perfectly balanced since the repair.

Useful (1) Report

Marcos Antonio 2026.04.05

     

Our washing machine started shaking violently during the spin cycle and sometimes even moved slightly across the floor. The technician inspected the suspension system and found the shock absorbers worn out. After replacing the shocks he leveled the washer and tested it with a heavy load. The drum stayed perfectly stable during the spin cycle and the noise disappeared completely. The washer now runs smoothly again and the whole machine feels solid like it did when it was new.

Useful Report

Reply from SDS

Thanks for the great review! We're happy to hear you had a positive experience with our service.

Elias González 2026.04.04

     

The dishwasher would fill with water but the spray arms were barely moving. The technician diagnosed a failing circulation motor that was not pushing water through the system. After installing the new motor he ran a test cycle and the spray pressure returned immediately. The dishes now come out clean again and the machine sounds much stronger during the wash cycle.

Useful Report

Reply from SDS

We’re grateful for your support and for taking the time to leave us a review. Glad we could help!

Fabiola Fernandez Ramos 2026.04.02

     

Our refrigerator started leaking water under the crisper drawers and the temperature slowly climbed. The technician removed the back panel inside the fridge and found the defrost drain completely clogged with ice. He cleared the drain line, flushed it with warm water, and checked the airflow around the evaporator coil. Once the unit restarted the cooling returned pretty quickly. He also explained how small food particles can block that drain over time. The fridge has been perfectly dry and cold again since the repair.

Useful Report

Reply from SDS

We appreciate your kind feedback! Our team works hard to provide reliable service, and we’re glad it showed.

Blake Liddick 2026.03.31

     

The wine cooler began making a buzzing sound and the temperature inside slowly increased. The technician opened the rear panel and found the cooling fan motor was failing. After installing the new fan he cleaned the condenser fins and restarted the system. The noise disappeared and the cooler quickly returned to the proper temperature. Everything has been running quietly since then.

Useful Report

Reply from SDS

We’re so happy you had a great experience. Thank you for trusting us with your repair!

Antoni Lopez 2026.03.30

     

The wine cooler kept running constantly and the temperature display did not match the real temperature inside. The technician tested the sensor and confirmed it was sending incorrect readings to the control board. After replacing the sensor he recalibrated the cooling system and monitored the temperature for a while. The cooler now cycles normally and maintains a steady temperature again which is exactly what it should do.

Useful Report

Reply from SDS

Your feedback means a lot to us—thank you for the 5 stars and for letting us serve you!