COM Reviews

Ricardo Palmeiras 2026.04.29

     

Our Rancho Bernardo location relies on a high-volume commercial dishwasher, and it suddenly began losing pressure mid-cycle. The technician traced the issue to a worn wash pump seal and pressure drop at the inlet. He replaced the seal, tightened all connections, and tested several racks back-to-back. Performance returned to normal immediately. The repair was handled quickly and professionally, keeping our operation on schedule.

Useful Report

Jose Rizo 2026.04.28

     

We experienced repeated shutdowns with a commercial blast freezer that wouldn’t complete cycles overnight. The technician checked the control logic, sensors, and compressor operation before finding a faulty defrost sensor causing premature shutdowns. He replaced the sensor, updated calibration settings, and monitored a full cycle before leaving. The freezer has been running reliably since. Clear explanations and efficient troubleshooting made the visit straightforward.

Useful Report

Oscar Garay 2026.04.27

     

Art worked on our commercial charbroiler after it started heating unevenly across the grates. He inspected the burners, found two partially clogged gas ports, and corrected the airflow balance. After cleaning and adjusting everything, he ran the unit through multiple heat cycles to confirm consistency. The difference was immediate. Heat distribution is back to normal, and recovery time between loads improved noticeably. Very focused, professional work without any disruption.

Useful Report

Taianne Evellin 2026.04.26

     

Our production kitchen had an issue with a commercial vacuum tumbler that wouldn’t maintain rotation speed. The technician traced the problem to a failing drive capacitor and replaced it immediately. He verified speed stability and ensured the motor wasn’t overheating. The unit is now operating smoothly again, keeping production on track. The repair was clean, efficient, and handled with obvious experience.

Useful Report

Franz Aguilar 2026.04.25

     

We contacted Commercial Service Center when our commercial warming drawer stopped responding to control inputs. The technician identified a failed touch interface and a loose internal connection. After replacing the panel and securing all wiring, the unit functioned normally again. Everything was tested thoroughly before completion. The service felt organized, reliable, and handled by people who clearly know commercial equipment.

Useful (1) Report

Dax Breakfast 2026.04.24

     

Wade serviced our commercial dough sheeter after it started slipping and producing uneven thickness. He disassembled the drive system, replaced a worn belt, and adjusted roller alignment. Once reassembled, he tested several passes to confirm consistency. His attention to detail stood out, and the equipment now performs exactly as expected. Very professional and precise work.

Useful Report

alexandre milim 2026.04.23

     

We had a commercial hot holding cabinet that wouldn’t maintain temperature consistently throughout the day. The tech tested the heating elements and identified one that was cycling intermittently. He replaced it, recalibrated the thermostat, and monitored the unit under load. The cabinet now holds stable temperatures without fluctuation. The repair was handled efficiently with clear explanations and no disruption to our workflow.

Useful Report

Caio Ferreira 2026.04.22

     

At our Poway location, a commercial glasswasher began leaving residue and shutting down mid-cycle. The technician inspected the pump, filters, and control board, discovering a partially blocked circulation line and a failing pressure switch. After addressing both issues, he ran multiple test loads to confirm proper performance. The machine is now cleaning effectively again, which made an immediate difference in operations.

Useful Report

Ana Carolina 2026.04.21

     

Sal coordinated service for us when our commercial tilting skillet stopped responding to temperature controls. He scheduled everything quickly and kept communication clear from start to finish. The technician found a faulty control relay and replaced it the same day. Thanks to the smooth coordination, downtime was minimal. Sal’s professionalism made the process straightforward and easy to manage during a busy workday.

Useful Report

Ceballos Jamon 2026.04.20

     

Our commercial reach-in freezer started making excessive noise and cycling constantly. The technician inspected the compressor mounts and discovered worn vibration dampers along with a failing condenser fan. Both were replaced on site, and airflow was restored to normal levels. The freezer now runs quietly and maintains temperature without overworking. The entire visit felt efficient and well-organized, with no unnecessary recommendations.

Useful Report

natalia diaz 2026.04.19

     

Nick worked on our commercial pressure steamer after it began losing pressure mid-cycle. He methodically checked valves, gaskets, and the control assembly before identifying a leaking solenoid. After replacing it, he verified pressure stability across multiple runs. His approach was focused and professional, and he clearly understood the equipment. The steamer is back to full performance, and the repair was completed faster than expected.

Useful Report

Andre Franklin 2026.04.18

     

Our operation in Oceanside depends on a high-capacity commercial ice bin, and it stopped dispensing properly during peak hours. The technician traced the issue to a worn auger motor and buildup restricting movement. He replaced the motor, cleared the system, and tested continuous dispensing to make sure it could handle volume. Everything has been running smoothly since. Really appreciated how efficiently the repair was handled without interrupting daily operations.

Useful Report

Mauricio Enciso 2026.04.17

     

We ran into an issue with a commercial conveyor toaster that suddenly started burning one side while leaving the other undercooked. The technician inspected the heating zones, found a failing element and misaligned sensor, and corrected both during the same visit. He recalibrated the unit and ran several test cycles to confirm even heat distribution. The toaster is now consistent again, which is critical during morning rush. Clean work, no wasted time, and clear communication throughout.

Useful Report

Alex Grigore 2026.04.16

     

Adam handled a repair on our walk-in cooler that started creeping up in temperature overnight. He traced the issue to a failing evaporator probe and a partially clogged drain that was causing ice buildup. He replaced the probe, cleared the entire line, and verified the defrost cycles afterward. The cooler dropped back to normal temps before he left. Calm, confident, and extremely knowledgeable.

Useful Report

Diana Alves Peixoto 2026.04.14

     

Our location in Coronado relies heavily on a commercial pasta cooker, and it suddenly stopped maintaining boiling temperature during dinner service. The technician arrived quickly, checked every heating stage, and found a failing contactor plus buildup blocking the water level sensor. He replaced the part, cleaned the system, and monitored multiple cycles. The cooker is stable again, and we avoided canceling orders. Very professional and efficient work.

Useful Report

Elizabeth Rose Allison 2026.04.11

     

Commercial Service Center repaired our commercial beverage dispenser after it stopped maintaining carbonation and pressure. The technician diagnosed a faulty regulator and replaced it immediately. After testing flow and pressure levels, the system returned to normal operation. The service was efficient, well-coordinated, and handled by experienced professionals.

Useful Report

Alejandro Dovale 2026.04.08

     

Our commercial heated display case began shutting off intermittently during service. The technician traced the issue to a loose wiring connection and a failing relay. Both were corrected during the visit, followed by extended testing. The unit now maintains steady operation. The repair was completed quickly and without disrupting workflow.

Useful Report

Beft Barder 2026.03.31

     

Max came out to fix our steam table that suddenly stopped heating during lunch service. He moved fast but still checked every component carefully. Turned out the thermostat assembly had failed, and he had the exact replacement on his truck. He installed it, tested the unit multiple times, and made sure we were comfortable running it before he left. Super respectful, organized, and clearly experienced with commercial equipment. We were impressed by how smoothly everything went.

Useful Report

Abreus Surf 2026.03.28

     

Our prep kitchen’s sous-vide machine stopped circulating water properly, which was slowing down our workflow. The tech identified a blocked impeller and a failing circulation pump. He cleaned the system, installed a new pump, and tested everything until temps and flow stabilized. The difference was immediate. The visit was efficient, low-stress, and handled by someone who clearly understands commercial gear.

Useful Report

Christian Dela Cruz 2026.03.25

     

Commercial Service Center repaired our commercial ice cream freezer after it began fluctuating in temperature overnight. The technician identified a failing thermostat and cleaned the condenser assembly to restore airflow. After replacing the thermostat, he monitored performance for stability. The freezer is now operating consistently again. The process was smooth, organized, and professionally handled.

Useful Report